Let’s Skip Ahead…

Sorry for the delay….we had company the beginning of April, so I had to clean out the guest room closet of all my boxes of miniatures and stash them somewhere else. Then, I got the flu for 3 weeks, and with my weaker constitution from cancer two years ago, and my forthcoming 70th birthday – well, let’s just say I don’t bounce back as quickly as I used to. But I’m back and I’ve been working on my French Country Windmill Cottage. With just a few details left to finish the inside walls, I had to erect the 3 walls so I could gauge how the staircase will fit and the upper floor for the tiny bedroom.So, the stairs will go as shown (approximately). The small bedroom floor will fit right above the french door casing. You can see it in the 1st pic under the french doors to give you an idea of how it will look – only one flight up. I had originally planned on having the 2nd floor extend all along that one side to the top of the left Palladian window, just cutting out an opening for the stairwell. I was going to make a tiny bathroom there in the front part over the stairs, but changed my mind. It would make the bottom floor too dark and hide the strikingly charming front wall. So, the bedroom loft will be supported by two rustic square columns at the outside corners, and some kind of railing around it. Here are pics from different angles.As you can see in the first pic in this series, the right wall will be the kitchen, with the sink and stove under the large window. I think I might have room for a small island, and then the dining table will be under the 2nd floor by the french doors. The sitting room is by the fireplace – I will be making a small French sofa and then see what else I have room for. I’ve kept the color scheme the same thruout the small space to keep it cohesive. The light yellow color is actually “Buff” in chalk paint from Plaid, as is the “Sage” on the windows. The kitchen components are in a pale yellow as well. My next decision will be how to manage a roof. I want to keep the half-circle concept of the front wall going all the way to the back, and the rest of the ceiling to the right will be angled with rafters. I also want the whole ceiling to be made of wood planks inside and wide corrugated cardboard outside. The whole of the outside walls will be covered in stucco, (which is what I tried out on the fireplace), with some exposed stone work like the inside. The dimensions are 15″ wide and tall, except the front is 12 1/2″ from the recessed front door to the stairway wall, and 16″ deep. It would be a square if the roof wasn’t round!

So that’s it for my update. Next post should show what kind of mess I’ve made of the roof. I’ve learned so much about how to execute my ideas, so I’m hoping I haven’t run out of problem solving brain cells. Hope you like it so far…

Windows and Doors

The day after my last post, my Palladian windows and front door arrived for the Windmill House, so I got to work making the left side wall. The window I ordered for the kitchen is huge, a 3 section window. I want to let in a lot of light, and most of the pics I’ve seen of French kitchens have a large window over the sink. This is a quality window built so the plexiglass slides out so you can paint it easier. I began adding strips of wood to the sides so it would meet my measurements for the bottom of the wall, and squared off the top. This is the window glued to the bottom and side walls when I realized I had left the plexiglass in the window and glued it all shut. Not a great start. I had to pry and whittle the two square wood strips off the top of the window to be able to remove the plexiglass. Let me tell you, wood glue is pretty darn permanent! So, with that accomplished and back at square one, I slid out the plexiglass and painted the window with the color Sage from the set of chalk craft paints I ordered from Walmart by Folk Art. I then reglued it to the bottom and side walls while considering what to do with the bottom of the wall. I decided I wanted a backsplash of stone, so I got my cardboard egg carton and started slicing strips and then cross cut into blocks. After gluing them in place, I plastered the remaining walls as well as carefully over the cardboard, making sure I got the plaster in between the blocks.After the plaster dried, I picked off more of the plaster from over the top of the blocks, yet leaving some to make it look like aged whitewash that has chipped over the years. I also touched up the stones with some shades of gray for realism. The plain plaster was painted with two coats of Valspar sample house paint “Cream in my Coffee” left over from my Storybook Farm dollhouse. I want cream colored walls in this house. There will be 3 open wooden shelves in the space to the left of the window for storage. Below is the outside of the front wall.I cutout the openings and painted the windows after ensuring that I would still have room for a fireplace inside, between the windows. So, here is the inside of the wall….There is finishing trim that gets glued over the window to complete the look, but I’m not sure if I want it in the wood color (to match the front door), or in Sage. The fireplace is drawn and ready for cardboard stones to be glued on. There will be a large mirror over the fireplace mantel, and the walls will be painted plaster.

By the way, I did seal the brick floor with Minwax Polycrylic in Clear Matte.See how the top picture is a darker, more enhanced color than the unsealed bricks in the bottom picture? I have two French rugs that will define the dining room space and the sitting room, so not a lot of the floor will be exposed. It will really add interest to what could have been a boring floor.

I have started on the main entrance door – still have to finish the inside.I’m anxious to get some walls up, but realize I need to put the stucco on the outside of the house before I glue walls together. It would make finishing them so much easier, but then there’s the problem of how do you tape it together to dry without ruining anything? Still pondering that.

Ah, prendre des decisions!

Rethinking my Grandiose Ideas

After more thought and realizing I’ve been unrealistic, I’ve tried to back off on my grand ideas of what this Windmill House might become. I think all those pics I’ve saved from Pinterest have inflated my brain. I mean, I’m not redecorating my house here – it’s a Miniature, Paula. Get a grip! There is no possible way I can incorporate everything I love about French Country into a little building 16″ deep, by 12 1/2″ wide, by 16″ high. Even if I am making the back section 14 1/2″ wide and 17 1/2″ high (at it’s highest point). I think that once I get all the walls glued together, I’ll be able to visualize it better. My Palladian windows are supposed to arrive Tuesday, and this is Friday. I did manage to cut the two side walls their new height for the back addition where I’m raising the roof by 1 1/2″ to give me 9″ ceilings for the kitchen/dining area. Here is the final draft of the floor plan.So, I added on the 2″ as shown on the right, above. That extends for 12″ from the front door to the back of the house. This will give me room to incorporate kitchen counters and appliances without taking up the main floor space as well as a larger vaulted ceiling. Hope to be able to do an island, as well. So, with the main floor finally decided, I cut a 12″ x 2″ piece of wood and glued it to the right side. Then I gave the whole floor a good base coat of flat white to prepare it for the brick stencil. After the white dried, I applied a coat of Light Mocha flat acrylic by Apple Barrel to mimic the grout. I sprayed the back of my brick stencil with adhesive, stuck it in the upper left corner of the main floor (I didn’t want my first attempt to be near the back opening in case I messed it up), mixed up some water with the brick material, and spread it over the stencil, scraping it off evenly with a small 6″ metal ruler, then carefully lifted the stencil off. This is what I ended up with.Pretty impressive, eh? I love the Terra-cotta shade, it’s really a nice subtle, warm color. There are others on the Bromley Craft Products website, like red, two grays, buff, etc., plus other stencils so you can do stone or brick. It’s worth checking out at http://www.craft-products.com. They are in England, but sent the package by Airmail. Here’s that picture again of the stencil and brick compound.The thicker you spread the compound, the darker the brick will be. I didn’t want a textured surface, so I smoothed it out as much as I could. If I were doing the outside of a building, however, I might go for a rougher look. Which I might try in places on the outside walls since I have over half the compound left over. Here’s the finished piece except for a coat of matte polyurethane I will do tomorrow outside..You can pretty much tell where I had to overlap the stencil to line it up for the next area. You aren’t supposed to go over any areas already stenciled, but it’s hard to avoid, and I’m not equipped to be a perfectionist. So, the lapped places are evident by the darker colored bricks (because they are thicker). And, I did lightly sand a few places where it was too lumpy. But, bricks in real life aren’t identical and have minor flaws and color changes. If judged by those standards, my floor is pretty darn good! The sealer will also enhance the color as well as seal it to keep from chipping off. I’m excited to see the finished product. You can use acrylic paint to apply other colors if you want an even more “authentic” look. I’m quite happy with it the way it is.

Okay, this is the picture from Pinterest I’ve fatally fallen in love with. It’s a little cottage, and I’ve patterned my miniature after this photo. I absolutely adore it!See the loft in the upper left corner? And the kitchen along one wall? French doors? Palladian type windows? Transoms? Just one sofa for the sitting area? I’m dying here. It’s so perfect for a mini, isn’t it? It may not look French, but mine will. Sigh!!!! A la prochaine, mon ami!

Here We Go Again!

As soon as I was done with Storybook Farm, I knew I wanted to build either Baslow Ranch by Greenleaf Dollhouses, or Loganberry Mill Dollhouse.Both very intriguing options. However, I fell in love with the windmill and French Country, so Loganberry it is. My enthusiasm dimmed somewhat when I realized how small the Mill House is. The stated dimensions are 15″ wide by 8″ deep and 16″ tall. Once I dry fitted it together so I could visualize the dimensions, I was even more discouraged.I can’t even fit a staircase in there, let alone any significant furniture. A second story must have a staircase or ladder in my opinion. A lot of people eliminate them because they take up too much room, but why bother building at all if you don’t attempt to make it realistic? And if you eliminate a bathroom, the era must allow for an outhouse. Anyway, moving on. My other concern is that the rooms aren’t very tall. The downstairs is 7 1/2 inches in height to allow the floor to be 1/2″ off the ground (to allow for an entrance step?). I prefer 9″ to allow for furniture height and chandeliers and/or beams, etc. This upstairs is 8″, which I can live with, although it’s a curved roof and half the width of the downstairs because of the accompanying shed-style angle. To top it all off, my measurement of the width is 12 1/2″, not 15″. Where did the other 2 1/2″ go?You can see, above, that I decided to double the depth to 16″ to give me more room to create, but the width remains at 12 1/2″. As compensation, I’ve decided to eliminate the top floor beneath the shed type roof, thus allowing for a slanted ceiling along one side of the house to give it the appearance of openness. I’m also going to attempt to raise the side walls on the extension to 9″ (and extra 1 1/2″) to give me more head room in the back half. This is because the standard door opening is 7″ high, plus you need room for the door trim. With only 7 1/2″ to work with, this makes planning windows and doors extremely difficult. I want a pair of French doors off the dining room to a patio, which I can’t do without giving myself more headroom. I’ve even drawn up plans on graph paper to help me visualize the house from all angles.Have I made you drift off to sleep yet? That’s okay. I want to do this so I have a record of my ramblings. Lol. So, I’ve run out of 1/8th inch basswood sheet plywood until I get my order from Dick Blick (art & hobby supplies). So with my one remaining piece, I cut out the extension on the main floor and the upstairs addition.

I have received my order from England of the terra cotta brick compound and the brick stencils. One is herringbone for the main floor and the other is for arched windows inside or out. I hope to work on the herringbone brick floor tomorrow so I’m ready for the walls when the additional plywood arrives. It has been a slow start waiting for supplies.

I did build the windmill as well. I followed the picture on the Greenleaf site, and it has turned out really well!I had 12 inch barbecue skewers on hand, and the size is perfect. I will attach it after I cut the openings for the windows – which I don’t have yet, either.

So, that’s about the state of things as they stand right now. I’ve had all kinds of expansive design ideas in my head, and I’ve ordered kitchen appliances just to realize I may not have the room for them. This will be an on going surprise. I’ve already decided that if this structure doesn’t fulfill my dreams of French Country, I’ll just have to build another house in that style after this one. Perhaps the French Mansard Roof Dollhouse by cinderellamoments.com. I have Caroline Dupuis’ book that tells me how!Au revoir!

Storybook Farm is Finished

Actually, I finished it around Feb 16th – down to the last detail. So now what I’ll do here is show the final pics with some explanations where necessary.The last to be completed, the exterior, gets to a point where you have to tell yourself, “Enough, all ready!” It can be overdone, but I think I stopped in time. If you want it to look realistic, you have to put in the details. So, from left to right, the chicken yard is enclosed by stone pillars connected by fencing, both of which I made myself. I also made the structure supporting the wisteria and strung fairy lights as well. The gate has a pointed arch over top.The bears have a cottage enterprise where they are selling fresh eggs, apple pies, and honey from their own hive. The bubblebees are everywhere on the wisteria and roses. You can just see the little chicken ladder up to the coop, and their pet parrot perched on top of a pillar. I laid artificial moss in between paving stones for the entire patio area, and made the wreath on the screen door.In the first pic, you can see the water fountain attached to the wall to provide water for the chickens and bees. The above pic shows, the little shelving unit I made to display the items for sale. There is a basket of eggs, jars of honey, and 2 apple pies (hidden, but there). In the bottom left corner you can just catch a glimpse of the hive. Of course, the chickens are wandering looking for bugs.Here’s a good night time shot with the fairy lights illuminating the bee hive, and the chicken coop and chickens.And another, a little farther away. I made the blue screen door, too. Here’s a closeup of the front of the house, with the lavender phlox, the flowering tree, the front porch with the hanging flowers, and the mailbox and front door wreath. I’ve since made little letters for the mailbox and some packages that were delivered on the front porch, as well as a shade for the front door. There’s also a porch light to show the way at night.This is a pic of both my bear houses with their outside lights on. Now to the completed interior…Here is the inside all lit up, with a view of the side patio from the back. Now I’ll take you room by room.Two different angles of the kitchen. The turquoise screen door leads out to the chicken yard. I purchased all the components in this room, and painted most of them. I made all the chandeliers in the house ( 5 ). There are two here in the kitchen with bright white bulbs in them for more illumination. I wallpapered some walls with scrapbook paper, and painted the one wall yellow. I purchased the handmade tile behind the sink from Germany, glued beams to the ceiling, and made all the window coverings in the house, as well. Notice the cute corbels framing the door opening to the living room? Oh, and their pet dachshund, Dilbert, Dilly for short. Don’t know if you can see the tiny grey mouse under the kitchen sink, but he’s there!I plastered the walls in the living room to add texture, and built the stairs from scratch. Not a great job, but I wanted the staircase to turn on a landing before continuing upstairs. The floors are popsicle sticks painted with a white wash. I built the bookcase, the fireplace, and the window seat, as well as the little desk (on the right) under the stairs. It has a battery operated pretend oil lamp and a little bench seat. The fireplace has the same tiles as the kitchen, and a switch up inside the firebox to turn the lights simulating the fire on and off. I did the little painting of a tree over the bookcase, but the working grandfather clock was purchased. I painted it. Still need some accessories on the bookcase and the fireplace mantel to complete the scene.Upstairs, there is the bathroom over the kitchen. Everything in here was purchased except for the little bench I built and painted, and the chandelier. The floor is laid with diagonal popsicle sticks and some more tiles leftover from the kitchen and fireplace. I ran corrugated cardboard around the walls to simulate bead board, papered the two side walls with scrapbook paper, plastered the front wall and painted the area around the octagon window to match the wallpaper.And finally, the bedroom/craft room. Once again, grey washed popsicle stick floor. The large dormer was made into a bed, complete with headboard and footboard. This is a detail from a previous post showing Squeaky and Sky in the bed. I made all the bedding, wallpapered two walls with scrapbook paper, painted the rose painting on the wall, and built board and batten on the bottom of the wallpapered walls. Back to the top picture, I made the toy shelves, the window treatments and the chandelier. Alice (another character from storybooks, thus the name of the farm) is seated at the craft table where she sews for the family and makes miniature dollhouses.Lastly, a shot of the other side of the house showing the bay window, the lace curtains in the upstairs window, the stone trim which is all over the house, and the landscaping.There you have it. Storybook farm. Did you notice the chicken weathervane on the roof over the screen door? Details. I can’t believe I did this, but I love it. My next project is an old Mill House done in French Country style. So, I hope to transform this into something beautiful. This could take awhile!! Thanks for following me on my journey.

Moving into the final phase..

Finally, after 6 months, I’m practically done with Storybook Farm. Last pic I posted was when I was “stoning” the chimneys. Those came out well, and altho I didn’t allow for how much larger they would be with concrete and stones, they still fit within the aesthetic dimensions of the home. As I said, all the chandelier wire was fed up into the chimneys to the on-off switches and batteries, with the wires hidden under the shingles. Here is a pic of the whole interior lit up, altho still empty. Lots of beautiful light!The shingles were a job, as I learned on the last house. I think it took me about a week to color wash each shingle and hot glue it to the roof. I intend to count each one, but my estimated guess is around 800 individually painted and glued shingles. I will report back on the actual count. But, as you can see, the extra effort is worth it.The above pic shows some vines and flowers I glued to the corners and wrapped around the sides and roof. I needed some inspiration to keep going on the chicken yard. I also glued down “moss” on a base board to mount the house on. There will be more landscaping once the chickens have a yard to roam around in, and the bears will be selling fresh eggs! You can probably spot that the gable on the left doesn’t have the grey trim around the roofline like the other ones do. I will get to that – I’m always getting pulled away by another thought I had before I finish what I’m working on! Oh, and I finished the front porch except for flowers, etc.

Now, the side yard is not very large – I only allowed 6 inches out from the side of the house. I don’t want it to overwhelm the attractiveness of the main structure. I have to build steps down from the screen door, and lay some paving stones in the yard with flowers and trees (?) around the perimeter among the fencing which will be there.As you can see, I’ve already glued a small outdoor fountain/faucet to the side of the house by where the entrance gate will be. I made the garden fence pillars from 3/4″ pieces of balsa wood glued together, then covered in cement and flat paving stones. I’m thinking of having a tall post come out of each pillar so I can string battery powered fairy lights from them for lighting. And I’ll probably make some kind of arched trellis over the entry gate. I did buy the little chicken coop and there’s also a water pump as well. I’d like to place a bench in there somewhere, as this will be where visitors come to buy eggs. Then, except for landscaping, I’ll be done!

I’ve also been cutting into house time with a new hobby I’m trying out. Needle felting. My original thought was (and still may be), to make my own little animals for my houses. But, I have to start on the basics first, and here are my first 2 bunnies from needle felted wool….Oh, mousey was my very first attempt (she’s supposed to be sleeping), then came Snowflake, the polar cub. Actually, she was supposed to be a second mouse, but the head shape was all wrong, and she became a polar cub instead. My ultimate goal for my mice will not be realistic, but whimsical, like these examples I found on Pinterest…I have to graduate to metal armatures as a skeleton to wrap the wool onto. There are so many cute tiny animals out there just waiting for me to try. I have to get the basics down first…..I really don’t know why I do this to myself. I just refuse to stop trying, I guess!

Back at ya soon, with a finished Storybook Farm!!!!!

I’ve got a name!

I came up with “Storybook Farm”! After all, it’s home to the 3 bears, (Mama and 2 sisters), and Alice, the petite blond doll in the plaid dress – she looks like Alice from Alice in Wonderland, and, a chicken yard – thus, Storybook Farm. I love it. I knew it would speak to me.

The Exterior

I’ve already shared some updates on my main blog, but will do so here as well.

My decision to plaster the whole outside of the cottage became apparent when I considered what mood the inside projected. My original intent to do clapboard siding painted a mellow green just didn’t suit the shabby chic interior. This is why I wait to do the exterior last. If I had completed the outside before the interior, I would have felt the need to be more classic, which I’m not. I’m more whimsical, especially when you consider my choice of inhabitants. Moving on, since the all white plaster was stark and without personality, I decided on a stone foundation and corners.I finished mortaring the stone yesterday – what a job. I used powdered mortar I ordered, and it was a bear to get it inside all the little cracks and then try to wipe it off the stone. You can see I decided to make stone chimneys as well. There is only one fireplace in the cottage, but I will be hiding the wires and on/off switch to the five chandeliers inside the chimneys. You can see some wires coming out of the corner of the house by the roof, and more at the top (in the previous picture). The fireplace switch is up inside the fireplace itself, and the outside porch light switch is under the bed covers in the loft.The interior lights are a soft white, while the porch light is a bright white, which is really bright. Thus the soft white on the inside. I still have to build the porch, but that will wait until after I paint the plaster with a base white to seal it, then a Valspar sample color called Cream in my Coffee.Originally, I was going to shingle the gables, but decided it would be overkill with the shingled roof. So, I’ve opted for a very subtle pink in Desert Bone instead. Then I will “age” the house with greens, tans, etc. and moss on some of the mortar and stone.

Back to the chimneys – I drew them and then built them out of cardstock, and taped them together with masking tape. However, when I went to “stone” them, the mortar wouldn’t stick to the tape. So, I ripped the stones off and recut the chimney structure from balsa wood and this time I’m using my concrete patch in a thick layer and then squishing the stones into each individual piece. When done, I will glue the four sides together and attach to the roof after I insert the lighting wires. The wires will be hidden under the shingles.So that’s where I’m at now. Working on stoning the eight sides of the chimneys.

Still having fun! And still don’t have a name for this cottage. Since there will be a side yard with chickens, I think the name should end in “Farm”. But what goes before that? Still waiting for the “farm” to speak to me, and it will. Until next time….

Farmhouse Bedroom – last room in the house!

Yes, I know. Long time no hear from. Well, I’m going to fix that now. I took about a month off from the farmhouse to devote to other projects – a puzzle, reading, a lot of goofing off, etc. You know, R&R. But, I’m back and forging ahead with blinders on, I guess, because I neglected to take any pics of my progress!! So I’ll just have to take you thru it bit by bit. Aren’t you the lucky one. So, let’s start.

I laid the popsicle floor much neater that I’ve done any of the others by making same size cuts and placement. You can see how much neater the floor looks – although I think a haphazard placement of sticks has its own merits as well. And I ended up with this grey wash of color (it’s just white in the pic below). I finally got my grey and pink color scheme that failed in the bathroom! Then I moved on to the wainscoting – wanted something different here, not just the usual corrugated cardboard. I used two different thicknesses of wood to create more of a (kinda) board and batten effect. Tried skinny sticks as well, but liked this look better. Originally, I had painted every other board white or medium grey -which was pretty, but looked like a circus tent or carnival. So I repainted it all white. Much better. Let’s throw in a picture here….The above picture shows so much more that I’ve done. I added the railings , leaving a walkway to get to the bathroom. The large alcove became the bed loft – I made the white comforter with the lace and ribbon trim, and the pillows as well. Sky and Squeaky like their little hideaway. I’ve placed some miniature toys around – the darling ship in front of the bed has wheels and soldiers, and there is a train set on the shelves to the left of the sleeping loft. I painted the picture on the wall, too.See the red and blue wires coming out the left side of the bed? Those are for a porch light I hung outside . Need to run those to connect with other wires for the chandeliers that will hide in a chimney on the roof. More on that later….I added all the trim around loft, the floors, and the ceiling, made lace curtains for the windows (with roses, too). The craft table I purchased bare wood and painted it shabby chic to blend with the floor. Alice is sitting at the sewing machine with her scissors at the ready – she still needs fabric and thread. There are two working drawers in the table, which I lined with the same wallpaper from the walls. I made the little bench Alice is sitting on. She also likes to make miniature dollhouses, and will start construction on one soon (the one on the shelf just above her head is made from metal, and the front opens. Bought it!) To the left is an iron and ironing board which I bought, as well as the soft pink rug on the floor.Above is a picture of the whole inside of the house in it’s current state. As you can see, the fireplace in the living room is lit to take the edge off the chill. I rigged it up with a red and an orange bulb which I wired onto a battery and switch that is tucked away up the inside of the fireplace. I only have to press the button right inside to light the fire. Let’s try for a closeup….It was easier just to take it out of the house – I didn’t glue it in. I gathered some sticks and bits and pieces from the flower beds to build around the two nano lights. So cool.So, I’m making the two chandeliers for the upstairs now, so I can hang them and then put the backside of the roof on the house. I also have to make shades for the bay window in the living room, as well as a sofa and chair. I’ll also enclose more of the staircase.

Unlike most miniaturists, I like to finish the inside before I move on to the outside. It gives me time to get a “feel” for how I want the outside to look, based on what I did inside. Each segment involves a lot of design time. I know when I’m happy with something, and then I get going on it. Sometimes I have to figure out how to execute the look I want. That also takes awhile.

I’ll post again after Christmas, so here’s wishing you and your families a Merry Christmas from all my minis and me!

Farmhouse Bathroom

Since finishing (almost….) with Rosebud Cottage, I have been working on the second floor of this larger bearhouse. Contemplating my next move and several more takes time and consideration – rather like playing chess only much more fun. Anyway, decided to make a diagonal layout on the bathroom floor along with a tile inset under where the tub will be. Two reasons for the tile – the wood floor would get soaked when Sky and Squeeky make a mess in their baths, and because I patched a cutout where the stairs were intended to go per the kit, but I attempted to fill it in with a piece of wood. Which I did, but somehow it didn’t glue in level. Because of the uneven floor, the wood wouldn’t lay down flat; so, since I had some tiles left from the downstairs, I made a pattern to fit under the tub.Initially, I had to lay down the wires from the downstairs chandeliers, as per the first photo in the above series. I snaked them across the floor to the front corner so I can continue to snake them up the outside of the house to a chimney I will be making. The switch(es) will be hidden there. This last picture doesn’t show the tile section glued down yet, but as you can see, the tiles will be much more flexible going over the bump in the floor. I then laid the strips in a diagonal with a border matching the one around the tiles under the tub. Just because I wanted to do something different.

That grey polka dot wallpaper was bothering me, though. I just couldn’t wrap my head around it (too contemporary?), although I had thought that a pink and grey bathroom would be cute. But there isn’t any pink or grey in the patterned tiles – green, blue, and yellow, yes. Grey and pink, no. So, I started searching through my sheets of scrapbooking paper until I found THE ONE!Of course, the grey paper didn’t want to come off the walls. I use this paste called YES!, and as long as you spread it evenly all over the back, it adheres beautifully without any bubbles or wrinkles. I suppose if I wanted to soak it, it would come off, but that’s not even remotely feasible. Anyway, I picked off what I could, and the new paper looks great! That left me with the muddle of what to do with the gable window. I couldn’t see myself wallpapering around an octagon, so I just papered the two sides, and mixed and splotched a bunch of paint until it mimicked the wallpaper. Pretty good job, huh? And I hand painted blue roses on the little bench. A medicine cabinet and a towel and TP holder, and it’s almost done. Except for teeny, tiny accessories which I don’t have now.Oh – I installed wainscoting from finely corrugated cardboard, painted it white and added trim all around. I still might put a small shelf by the tub to hold bath salts, etc. And a beautiful blue-green chandelier, of course!…and a curtain, towels, soap…..

So that’s as far as I’ve gotten – the only thing left is the pink bedroom. And I have some ideas for that – I think I’ll make an extended bed in the large gable bump out, make a railing to go around the staircase opening, some wainscoting – maybe wood slats – and a bleached grey wood floor. The rest of the room will be devoted as a craft room. Little did I know that Momma bear is a miniature dollhouse maker, and loves to quilt! I never would have guessed! Now that I have a plan, I will transform this empty space into a craft room for Momma and maybe a playroom for the girls!That’s it for now – I’ve got lots of work to do – better get busy!